アルミボトルの軽量化

ブログ作成者: admin8月 26, 2015

The weight of aluminium bottle has been reduced further and further: the first beverage bottle 60 years ago weighed more than 80 grams. Today a 330 ml aluminium bottle only weighs about 13 grams.[br] The lightness of aluminium packaging helps to save resources during filling, product transportation, storage and the transportation of scrap at the end of a product’s life. Aluminium applications are effective at protecting perishable contents with the minimum amount of packaging material and therefore the maximum resource efficiency. Aluminium foil is by far the lightest ‘complete barrier’ material in a packaging composite. Virtually all cartons that require long term unrefrigerated protection are packed in laminates containing a…

アルミボトルの導電性

ブログ作成者: admin8月 24, 2015

Aluminium transfers heat 2.4 times faster than iron. This property, combined with the fact that very thin sheets can be produced, means that heat is lost and gained through aluminium very quickly. Hence it is ideal for cooking and as a cold drink bottle. Aluminium’s high thermal conductivity can help minimise the time and energy taken to process, chill and reheat foodstuffs and to chill drinks in cans and pouches. Aluminium foil dishes stand up well to all temperature variations encountered in the processing and use of packaging – from well below blast-freezing to the extreme heat of baking and grilling – without distorting, cracking, melting, charring or burning. Foil…

アルミボトルの装飾

ブログ作成者: admin8月 21, 2015

Aluminium’s bright or matt metallic finish plus its compatibility with all printing technologies provides designers with enormous scope to create packaging with stunning graphic design, shelf presence and brand identity. Drinks cans and bottle labels, confectionery foils, cosmetic tubes and, all benefit from the decorative function of aluminium and its wider range of surface treatments. Printing acquering In terms of aluminium decorating, the most common technique is standard printing with inks or lacquers. More recently, companies like INX International Ink Co. and Ball Packaging Europe have introduced digital printing to the marketplace. A digital print head applies images straight onto the metal surface. Images pass directly from computer to production…

アルミボトルのロールオン盗難防止キャップ

ブログ作成者: admin8月 19, 2015

Aluminum Roll-on Pilfer Proof Caps（ROPP Cap）for aluminum bottle. The capping machine would have to be “double-acting.” First it would have to push the aluminum capsule down onto the top of the bottle, creating a good seal between the EVA gasket material and the neck finish. Then the machine would have to gently roll on the cap, in the process forming the cap threads and tamper-evident band. The capping machine’s loading control had to be precise and consistent. Too much top load and the bottle might deform, too little and there wouldn’t be a secure enough seal capable of keeping liquid from escaping. Achieving a specific opening torque signature was essential if…

アルミ弾丸ボトル内側コーティング

ブログ作成者: admin8月 17, 2015

Shining aluminum container for food and liqueur using PPG and Valspar inner coating to ensure safety. Our inner coating machine is 9 sparay guns 3 internal coating process.All aluminum bottle must pass coating conductivity test. Valspar Inner Coating Fully commercial in Europe with several years history Approved in China Contains no BPA, PVC, NMP or NEP Color: clear， yellow， white Has equal resistance as epoxy/amino lacquers Base: polyester modified. Good resistance against soft and alcoholic drinks Pass post washing process. Pass pasteurisation and sterilisation process PPG Inner Coating Internal liner for spray application of extruded bottles and cans made of aluminum Use and suitable in permanent direct food contact

Guide to closures, cap & lids for aluminum bottle

ブログ作成者: admin8月 14, 2015

光沢のあるアルミニウムボトルのネックサイズ仕上げは、18mm、20mm、24mm、28mm、30mm、33mm、38mm、43mmです。ネック仕上げは400、410、415です。キャップスタイルには、アルミニウムスクリューキャップ、アルミニウムピルファープルーフキャップ、スナップキャップ、チャイルドレジスタントキャップ、テーパードコルク、ブラシキャップ、クラウンキャップ、リングプルキャップがあります。ディスペンシングキャップには、スプレー、ローションポンプ、トリガースプレー、パウダーキャップ、ガラスドロッパーキャップ、スナップトップキャップ、スナップトップキャップ、ドロッパーキャップ＆プラグ、ツイストトップキャップがあります。スクリューキャップ、ピルファープルーフキャップ、スナップキャップ、チャイルドレジスタントキャップ、テーパードコルク、ブラシキャップ、クラウンキャップ、リングプルキャップ、スプレーポンプ、トリガースプレー、パウダーキャップ、ガラスドロッパーキャップ、スナップトップキャップ、ドロッパーキャップ＆プラグ、ツイストトップキャップ

アルミボトルキャップトルクテスト

ブログ作成者: admin8月 12, 2015

トルクとは、アルミボトルにキャップを取り付けたり取り外したりするときに加えられる回転力です。アルミボトルにキャップを取り付けるときは、適切な量のトルクを使用して適切な密閉性を確保することが重要です。理想的には、トルクはキャップ全体に均等に分散される必要があります。誤解: キャップをきつく締めるほど、容器内の製品が漏れる可能性は低くなります。事実: キャップに過度の圧力をかけると、製品が漏れる可能性が高くなります。過度のトルクをかけると、キャップの一部のポイントに他のポイントよりも高い圧力がかかり、密閉が不十分になる可能性があります。キャップを取り付けた場合…

アルミボトル完成手順

ブログ作成者: admin8月 10, 2015

Aluminum packages are made and finished according to customer specific request. Finished including two steps (Table 1). Step 1: Surface treatment, including Original, Paint, Vacuum coated,Offset Printing. Step 2: Printing, including Screen printing, Heat transfer printing, offset printing. Table 1 Auminum Containers & Bottles finished step  Table 2 The difference between the different finished type Color Printing Area MOQ Screen printing <2 Straight (Figure 1) 5,000 Heat transfer printing 8 5,000 Offset printing 9 Straight (Figure 2) 30,000 Figure 1.  Screen printing & Heat transfer printing Printing aera Figure 2.  Offset printing Printing aera

アルミジャー印刷エリアアートワーク

ブログ作成者: admin8月 7, 2015

SHINING aluminum jar could printing all body, indclulding botton, side, cap. The artwork requirement as follows. Aluminum jar cap printing D1: Cap Top Print Area H1: Cap Side Print Area D1+H1: Whole Cap Print Area Aluminum jar body printing D2: Body Bottom Print Area H2: Body Side Print Area D2+H2: Whole Body Print Area Remark: 1.H1 H2 is Printing Deformed Area, more high more deforming 2.Antislip Strip Area can not Print

アルミボトルネック仕上げ

ブログ作成者: admin8月 6, 2015

A aluminum bottles neck finish holds the cap, stopper, or closure with protruding threads. A bottle and its corresponding cap must have matching finishes. For example, a 24/410 bottle will only accept a 24/410 closure. Screw thread or continuous thread closure sizes are expressed with two numbers separated by a hyphen or slash. The first number refers to the millimeter diameter measured across the inside of the cap’s opening or the outside of the bottle’s threads. The second number refers to the thread style, “GPI” or “SPI” finish. The Glass Packaging Institute (GPI) and Society of the Plastics Industry (SPI) are responsible for establishing uniform standards for glass and plastic…